============= Sakura Dither ============= .. image:: screenshot.png :scale: 60 Controls ======== .. image:: bitdepth.png :scale: 60 **Depth** selector controls output bit depth of dithered signal. | .. image:: type.png :scale: 60 **Type** selector controls dither type. Type 1 Natural / Transparent Type 2 Open / Wide Type 3 Warm / Slight de-essor feelings Type 4 Electronic / Enhancement | .. image:: autoblack.png :scale: 60 When **Auto Black** is enabled (lighting), output is muted if input signal fall below threshold level. **ACTIVE** indicator lights up when auto-black is working. .. csv-table:: Auto-Black Threshold :header: "Depth", "Threshold Level" 8, "-84dBFS" 16, "-132dBFS" 24, "-180dBFS" Meters ====== .. figure:: bitmeter1.png :scale: 60 .. figure:: bitmeter2.png :scale: 60 **Input / Output Resolution** displays shows detected input and output bit resolution. N/A Failed to detect bit depth (likely no signal) 8 From 1 bit through 8 bit. 16 From 9 bit through 16 bit. 24 From 17 bit through 24 bit. 32f More than 24bit or 32-bit floating point. 64f 64-bit floating point. Plugin-Specific Menu ==================== -------------------------- Deterministic Noise Source -------------------------- Checked All dither instances generate a same dither noise sequence after playback. This enables to get exactly same result beyond multiple bounces of same source, same range. This behavior might not be achieved depending to DAW’s actual plugin initialization implementation. Appropriate for single dither instance configuration, and you need to get exactly same result between bounces. Unchecked (default) Every dither instances generate different noise sequence. Appropriate for single or multiple dither instance configuration, e.g. final master or outboard send preprocess.